Product Demonstrations

Thermist Add-in in 60 Seconds

A quick look at what Thermist can do — automatic routing for ducts, pipes, conduit, and cable tray in Revit.

Equipment Builder Demo

Make a Revit family from a PDF cutsheet or a box sketch, place the connectors and download the family. Nothing to install.

Full Demo — All Features

A complete walkthrough of every tool and setting in the Thermist Add-in: A to B routing, Coil Connect, Jog, Wye and Equipment Builder.

• 0:00 A to B
• 0:49 A to B selecting conduit or pipe rack
• 1:08 A to B conduit bends
• 1:28 A to B duct to duct/VAV/Diffuser
• 1:59 A to B starting from family connector
• 2:10 A to B diffuser to duct branch with tap
• 2:44 A to B option for flex duct
• 3:06 A to B option for min straight run at connectors
• 3:23 A to B option for min/max height
• 3:39 A to B custom route
• 4:20 A to B what happens when route is not found
• 5:02 Coil Connect
• 5:37 Coil Connect settings
• 6:05 Coil Connect adding valves
• 7:17 Coil Connect second coil
• 7:45 Coil Connect working with fabrication parts
• 8:03 Jog
• 8:42 Wye
• 9:18 Wye with two discharges
• 9:33 Equipment Builder
• 9:50 Equipment Builder from a PDF submittal
• 11:25 Equipment Builder 3D model from the drawing
• 11:40 Equipment Builder adding connections
• 12:05 Equipment Builder type catalog
• 12:40 Equipment Builder saving and placing the family
• 13:50 Equipment Builder drawing equipment from scratch
• 15:30 Equipment Builder modifying an existing family

How to Download & Install

See how to download and install Thermist Add-in.